Perfect for lightweight building and repair jobs as well as the beginner craftsperson, the six-tool DEWALT DCK675L 18-volt cordless combo kit provides all the basic tools you'll need at your job site. It includes the DCD970 hammerdrill, DC827 impact driver, DC385 reciprocating saw, DC411 cut-off tool, DW059 high-torque impact wrench, and DW919 flexible floodlight. All tools are powered by DEWALT's 18-volt XRP batteries, and the kit comes with two XRP lithium-ion batteries and a 1-hour charger.
The DCD970 hammerdrill (view larger).
The DC411 cut-off tool (view larger).
The DC385 reciprocating saw (view larger).
 | DCK675L 18-Volt XRP 6-Tool Cordless Combo Kit
At a Glance: - Kit includes 1/2-inch hammerdrill, 1/4-inch impact driver, reciprocating saw, cut-off tool, 1/2-inch impact wrench and flexible floodlight
- Powered by 18-volt XRP batteries
- Includes two batteries and 1-hour charger
- Three-year limited warranty; one-year free service
| |  | |
DCD970 1/2-Inch Hammerdrill
The DCD970 1/2-inch hammerdrill's high-power, high-efficiency motor is capable of delivering a maximum of 450 unit watts out, which translates to performance in a broad range of applications. Its patented, three-speed, all-metal transmission matches the tool's performance to the task at hand, resulting in the fastest application speed and improved run time. This hammerdrill features three speed settings--0 to 500, 0 to 1,250, and 0 to 2,000 RPM in drilling, as well as 0 to 8,500, 0 to 21,250, and 0 to 34,000 BPM in hammerdrill mode--that make precise hole placement and material-specific performance easier to achieve.
DC827 1/4-Inch Impact Driver
Compact enough to access small spaces, the DC827KL 1/4-inch impact driver delivers up to 1,330 inch-pounds of impact power to perform a wide range of fastening applications. It has a no load speed of 0-2,400 RPM and 0-2,700 impacts per minute. Its frameless motor with replaceable brushes helps to extend durability and the life of the tool. The durable metal transmission and magnesium gear case provide added protection, and the ergonomically shaped, anti-slip grip and heavy-duty impacting mechanism provide comfort for long-term use without kickback and fatigue.
DC385 Reciprocating Saw
The powerful DC385 features a high-performance, variable-speed motor that drives the blade at 0-3,000 strokes per minute. And it has an aggressive-cutting stroke length of 1-1/8 -inch for powering through virtually any building material. The four-position blade clamp allows for flush cutting and increased versatility
DC411 Cut-Off Tool
Powered by a 6,500 RPM motor, the DC411's abrasive 4-1/2-inch-diameter wheel will slice through most metals quickly and cleanly. Besides the cutting and grinding wheel, the versatile DC411 will also accept a Zirconia-grit flap disk, stringer wire wheel, and rubber-backed sanding disc, allowing you to clean, smooth, shape and finish a wide variety of materials, including steel, wood and masonry. It also has a low-profile, jam-pot housing that ensures precise gear alignment for a smoother, quieter transmission while allowing access to tight, narrow spaces.
DW059 1/2-Inch High Torque Impact Wrench
Capable of delivering a maximum of 3,600 inch-pounds (300 foot-pounds) of torque, the DW059 is an ideal choice for heavy-duty fastening applications. With the ability to deliver 1,650 RPM and 2,600 BPM, this impact wrench lets you quickly complete tough tasks. A convenient rocker-switch makes it simple to switch between forward and reverse modes.
DW919 Flexible Floodlight
Brighten your workspace from any angle with the DW919 floodlight. Flexible and durable, it offers hands-free lighting with up to three hours of continuous burn time on a single charge. Bend, twist, wrap or snake the neck to achieve the perfect, steady beam of light in those hard to illuminate workplaces.
DEWALT's XRP Extended-Life Battery System
A tool's only useful if it runs long enough to get the job done, and the DEWALT XRP extended run time batteries keep the DCK675L combo kit running at full tilt. They provide up to 40 percent more run time than standard Ni-Cad batteries, and any XRP battery can be used with any 18-volt DEWALT tool, which allows you to expand your system by adding other DEWALT cordless tools (sold separately) as the demands of your job grow.
The DCK675L kit comes with two 18-volt XRP batteries and a 1-hour charger.
Warranty
This DEWALT tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase). It's also covered by DEWALT's one-year free service contract, where DEWALT will maintain the tool and replace worn parts caused by normal use--for free.
What's in the Box
DEWALT DCK675L combo kit with DCD970 hammerdrill; DC827 impact driver; DC385 reciprocating saw; DC411 cut-off tool; DW059 impact wrench; DW919 flexible floodlight; two 18-volt XRP batteries; 1 hour charger; 360-degree side handle; type 1 guard and wheel; wrench; backing flange; two-position side handle; contractor bag; operating instructions
 Everything you need to complete a variety of construction, renovation, and home improvement jobs (view larger). |
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
About Makita